The automatic premade bag packing machine series produced by our company adopts advanced technology, derived from European classic technology, combined with existing packaging technology, reasonable design and stable operation, and can pack various sizes of self-supporting bags and flat bags. Equipped with flexible processing stations, it can automatically fill, seal and other packaging processes. The bag-feeding model series is the choice to realize economical and reasonable packaging.If you have any questions about our machine,please contact me!
Packing bag material: composite film, PP, PE, etc.
Packing bag size: W: 150-300mm L: 150-400mm
Weight range: 5-1500g
Packing speed: 20-40 bags/min (the speed is determined by the material itself and the filling weight)
Packaging accuracy: ≤±1%
Air consumption: 0.3m3/min
Power: 3KW, AC380V, 50Hz;
Machine dimensions: 1700*1550*1550mm
Packing type: flat bag, three-side seal, four-side seal, zipper bag, self-supporting bag, etc.
1. Wide range of packaging: suitable for particles and blocks of various shapes, states and properties;
2. Convenient operation: PLC control and man-machine interface operating system make the operation intuitive and convenient;
3. The machine clamp adopts one-time automatic adjustment with high precision, which can realize the frequent interactive production of different bags, which greatly shortens the adjustment time;
4. Suitable for different types of packaging bags;
5. Complete prevention system to ensure the yield rate and not waste bags and materials;
6. The packaging part of the machine adopts stainless steel materials to ensure the sanitation of the materials;
7. High degree of automation: unmanned in the whole process of weighing and packaging, automatic alarm will be triggered when failure occurs;
8. Some imported engineering plastics are used, no need to refuel, which reduces the pollution of materials;
9. The pre-made bag packaging machine adopts an oil-free vacuum pump to avoid polluting the production environment.
Operation method and matters needing attention
(1). Clean up the dirt, sundries and other items on the machine, and clean and disinfect all parts in contact with food.
(2). Check whether the screws are loose during transportation. Rotate the belt by hand to check whether the machine is stuck and not rotating. If so, find out the reason and eliminate it.
(3). Add lubricating oil (36# oil) to the movable parts of the horizontal seal guide post, cam, and feed clutch. Check whether the gearbox is short of oil, if it is lower than the middle line of the oil tank, please add 36# oil.
a) Turn on the power and close the leakage switch in the electric control box.
b) Set the required temperature of the vertical and horizontal sealing molds, and let the temperature on the temperature control table rise to the required temperature of the packaging material.
2. Boot sequence:
(1). Trial operation of the jog packaging machine. Turn the unloading clutch handle to the disconnect mark. Start the machine idling without exception.
(2). Adjust the stepless speed controller to the slow position according to the mark.
(3). After the machine stops, send the packaging material to the longitudinal sealing mold along the forming device according to the steps of the film threading schematic diagram, click to seal, use the right hand to disengage the paper pull clutch, use the left hand to pull the film to the paper pull wheel, and close the paper pull clutch.
(4). Start the packaging mechanism to empty the bag and check the sealing quality.
(5). Close the loading and unloading handles and observe whether the blanking time is correct.
(6). Pour a small amount of materials into the barrel, start the packaging machine, try to package the finished product, and check whether the packaging weight meets the requirements.
(7). After the above preparations are completed, mass production of finished products can be carried out.
Shanghai Shigan after-sales service commitment:
Based on the spirit of pursuing high-quality products and customer satisfaction, Shanghai Shigan solemnly promises you with the principles of preferential prices, considerate service and reliable product quality.
1.Product quality commitment:
(1). The manufacturing and testing of products have quality records and testing data.
(2). For product performance testing, we sincerely invite users to personally check the whole process and performance of the product. After the product is confirmed qualified, it will be packed and shipped.
2. Product price commitment:
(1). Under the same competitive conditions, our company will sincerely provide you with preferential prices on the basis of not reducing product technical performance or changing product components.
3. Delivery time commitment:
(1). Product delivery time: try to meet user requirements, if there are special requirements, need to be completed in advance, and strive to meet user needs.
Hot Labels:automatic premade bag packaging machine,candy,particles,granule,munafacturer,supplier,price
The metal detector for tablets...View More
The large range carton checkwe...View More
A food checkweigher metal dete...View More
As an automated equipment that...View More
Pipeline metal detector for fo...View More