Introduction To The Cause Of Electrical Failure Of The Automatic Sauce Packaging Machine

With the continuous development of the period, the packaging field has also been accompanied by a significant improvement in everyone's living standards. The packaging field has gradually developed from the traditional hand-made field to fully automatic and automatic, which has indeed brought a certain degree of convenience to everyone's life and work. At present, the automatic packaging machine is also trusted and loved by everyone, and will play a key role in the future development of the field. The sauce packaging machine adopts cursor positioning, convenient adjustment, stable performance, small error range, and can automatically complete functions such as bag making, metering, filling, sealing, and cutting. So everyone knows what is the cause of its electrical failure?

The reasons for the failure of the electrical part of the sauce packaging machine are as follows:

1. The heat-sealing roller current is too large or the fuse is blown
Reason: There is a short circuit in the electric heater or a short circuit in the heat-sealed circuit.

2. The heat sealing roller is not hot
Reason: One electric heating wire is blown, two fuse is blown, three temperature control is faulty, at this time, set different temperatures, and the traffic lights do not jump.

3. The photoelectric position of the vertical sauce packaging machine is not accurate
Reason 1: The fuse of the controller is broken, or there is an internal fault.
Reason 2: The packing paper is not installed properly, so that the bidding center does not pass through the aperture center of the photoelectric head.
Reason three: The sensitivity knob is not adjusted properly.
Reason 4: There is dirt on the photoelectric head.

4. The temperature cannot be controlled automatically, and the temperature is too high
Reason 1: The thermocouple is in poor contact with the roller or is damaged.
Reason two: There is a fault inside the temperature controller.

When all of us have problems with the electrical part of the automatic sauce packaging machine, it is mainly caused by the above reasons. If the above problems occur, we can analyze the reasons first, and then solve the problems based on these problems.Shanghai Shigan is a professional manufacturer of granule packaging machine, powder packaging machine, liquid packaging machine, sauce packaging machine, multihead weigher, linear scale,and etc. If you have any questions, please feel free to contact us.

Related Products

Dextrose Filling Packing Machine Wholesale          Automatic Packaging Machinery Manufacturers

High Speed Powder Weighing Filling Machine        Lime Prefabricated Bag Packing Machine

Paste Liquid Filling Machine Food Grade               Fertilizer Granule Packaging Machine

Vertical Packaging Machine Unit Suuplier             50kg High Efficiency Silage Fodder Packaging Machine